Schneider A9R44225 | Acti 9 iID – RCCB – 2P – 25A – 300mA – type AC

Current price is: 2,900.84 EGP. Original price was: 4,028.05 EGP.

Protection of persons against electric shock by indirect contact
Suitability for residential isolation according to IEC 61008-1 and IEC 61008-2-1 standards
Protection of installations against the risk of fire
Easy to install with unified terminal design and wiring indication
Earth fault indication by a red mechanical indicator in front face

1 in stock

Schneider A9R44225 | Acti 9 iID - RCCB - 2P - 25A - 300mA - type A

Current price is: 2,900.84 EGP. Original price was: 4,028.05 EGP.

1 in stock

Add to cart
Buy Now

Schneider A9R44225 | Acti 9 iID – RCCB – 2P – 25A – 300mA – type A

The Schneider A9R44225 Acti9 iID RCCB is a high-quality residual current circuit breaker developed by Schneider Electric for reliable earth leakage protection in low-voltage electrical installations. It belongs to the well-known Acti9 iID range and is designed to help protect electrical circuits against residual currents caused by insulation faults, earth leakage, and indirect contact. With its 2-pole configuration, 25A rated current, 300mA residual current sensitivity, and Type AC protection, the Schneider A9R44225 is suitable for a wide range of residential, commercial, industrial, and building electrical distribution applications.

The Schneider A9R44225 RCCB is designed to monitor the balance of current flowing through the live and neutral conductors. Under normal operating conditions, the current entering the circuit is equal to the current returning through the neutral conductor. If an earth leakage fault occurs, the RCCB detects the difference between these currents and disconnects the electrical supply when the residual current reaches the specified threshold. This rapid disconnection helps reduce the risks associated with insulation failures and earth leakage currents and contributes to improved electrical safety throughout the installation.

With a rated current of 25A, the Schneider A9R44225 is suitable for circuits operating within this current range. Its 300mA earth leakage sensitivity is particularly suitable for applications where residual current protection is required to help reduce the risk of electrical fires caused by insulation deterioration or leakage currents. A 300mA RCCB is commonly used as an upstream or distribution-level residual current protection device in suitable electrical systems, depending on the design requirements and applicable electrical standards.

The A9R44225 is a Type AC RCCB, meaning it is designed to detect sinusoidal alternating residual currents. This makes it suitable for conventional AC electrical loads and installations where the expected earth leakage current is primarily alternating in nature. The device provides dependable residual current detection while maintaining stable operation under normal electrical conditions.

The 2-pole design allows the Schneider A9R44225 Acti9 iID RCCB to disconnect both the phase and neutral conductors when a residual current fault is detected. This complete isolation provides an important additional level of protection and makes the device suitable for single-phase electrical systems and distribution boards where both active conductors need to be disconnected during a fault condition.

Designed for operation on approximately 230–240V AC electrical networks at 50/60Hz, the Schneider A9R44225 can be integrated into a wide range of standard low-voltage distribution systems. Its modular construction allows straightforward installation inside electrical distribution boards using a standard DIN rail mounting system. This makes installation, replacement, inspection, and maintenance easier for electricians, contractors, panel builders, and maintenance teams.

The compact modular design of the Schneider A9R44225 Acti9 iID helps optimize available space inside electrical panels while maintaining easy access to terminals and operating controls. Clear markings on the front of the device allow quick identification of essential information such as rated current, residual current sensitivity, number of poles, and device type. This helps simplify inspection and maintenance work inside distribution boards and reduces the possibility of selecting the wrong protective device during servicing.

The Schneider A9R44225 also includes a mechanical indication system that helps operators identify the operating condition of the RCCB. This visual indication can assist electricians and maintenance personnel during troubleshooting by providing a quick reference to the device status after a residual current event. This feature can be particularly useful in commercial buildings, facilities, workshops, and installations where fast fault identification helps reduce unnecessary downtime.

As part of Schneider Electric’s Acti9 family, the A9R44225 RCCB is designed to integrate easily with other modular protection and control devices used in modern electrical distribution boards. It can be installed alongside miniature circuit breakers, surge protection devices, contactors, auxiliary devices, and other Acti9 components to create an organized and coordinated electrical protection system.

The Schneider A9R44225 is manufactured in accordance with relevant IEC 61008 standards for residual current operated circuit breakers without integral overcurrent protection. This means that the RCCB is primarily designed to provide residual current and earth leakage protection. It does not replace an MCB or other overcurrent protective device, so suitable protection against overload and short-circuit conditions should be provided separately according to the design of the electrical installation.

When coordinated with an appropriate upstream protective device, the Schneider A9R44225 Acti9 iID RCCB can provide a conditional short-circuit current capability of up to 10kA, depending on the installation configuration and selected protective equipment. Proper coordination between the RCCB and circuit protection devices is important for maintaining the required level of electrical protection and ensuring safe operation during fault conditions.

The Schneider A9R44225 2P 25A 300mA RCCB can be used in many applications, including main and sub-distribution boards, commercial buildings, offices, retail facilities, workshops, residential electrical panels, building services, industrial control environments, and other installations where earth leakage protection is required. Its 300mA sensitivity makes it especially relevant for distribution-level protection and applications focused on reducing the risk associated with leakage currents and insulation faults.

Another important advantage of the Acti9 iID range is its practical design for professional electrical installations. The device is built for straightforward wiring and integration inside modern distribution systems, helping panel builders and electricians achieve a clean and organized panel layout. Its standardized modular format also makes future maintenance or replacement easier without requiring major modifications to the electrical board.

The Schneider A9R44225 Acti9 iID RCCB is a suitable choice for electrical installations that require a compact, professional, and dependable residual current protection solution. Combining a 25A current rating, 300mA sensitivity, 2-pole configuration, Type AC residual current detection, DIN rail installation, and compliance with international IEC requirements, it provides an effective solution for improving earth leakage protection in low-voltage electrical systems.

For contractors, electrical consultants, panel builders, facility managers, and maintenance professionals, the Schneider A9R44225 offers a practical way to strengthen electrical protection while maintaining a compact and organized distribution board. Its compatibility with Schneider Electric Acti9 modular devices also makes it suitable for new electrical projects, panel upgrades, replacement projects, and maintenance applications.

The Schneider Electric A9R44225 Acti9 iID RCCB 2P 25A 300mA Type AC is therefore an excellent option for applications that require reliable detection of AC residual currents and effective disconnection during earth leakage conditions. Its combination of Schneider Electric engineering, standardized modular construction, clear indication, DIN rail mounting, and electrical protection performance makes it a strong choice for professional low-voltage electrical installations.

Brands

Reviews

There are no reviews yet.

Be the first to review “Schneider A9R44225 | Acti 9 iID – RCCB – 2P – 25A – 300mA – type AC”

Your email address will not be published. Required fields are marked *

Delivery

We ship to all 50 states, Washington DC. All orders are shipped with a UPS tracking number. Always free shipping for orders over US $200. During sale periods and promotions the delivery time may be longer than normal.

Return

Urna will accept exchanges and returns of unworn and unwashed garments within 30 days of the date of purchase (14 days during the sales period), on presentation of the original till receipt at any store where the corresponding collection is available within the country of purchase.

Your return will usually be processed within a week to a week and a half. We’ll send you a Return Notification email to notify you once the return has been completed.
Please allow 1-3 business days for refunds to be received to the original form of payment once the return has been processed.

Help

  • Give us a shout if you have any other questions and/or concerns.
  • Email: contact@mydomain.com
  • Phone: +1 (23) 456 789